Mazda 6 Owners Manual: Turn Signals
Move the signal lever down (for a left turn) or up (for a right turn) to the stop position. The signal will self-cancel after the turn is completed.
If the indicator light continues to flash after a turn, manually return the lever to its original position.
The turn signal indicators in the instrument cluster flash according to the operation of the turn signal lever to show which signal is working.
NOTE
- If an indicator light stays on without flashing or if it flashes abnormally, one of the turn signal bulbs may be burned out.
- A personalized function is available to change the turn indicator sound volume.
Turn and Lane-Change Signals
The ignition must be switched ON to use the turn and lane-change signals. ...
Lane-Change Signals and Three-Flash Turn Signal
Lane-Change Signals
Move the lever halfway toward the direction of the lane change—until the indicator
flashes— and hold it there. It will return to the off position when released.
Three-Flash ...
Other materials:
Mazda 6 Owners Manual: Uniform Tire Quality Grading System (UTQGS)
This information relates to the tire grading system developed by the U.S. National
Highway Traffic Safety Administration for grading tires by tread wear, traction,
and temperature performance.
Tread Wear
The tread wear grade is a comparative rating based on the wear rate of the tire
when tes ...
Mazda 6 Owners Manual: Camshaft position (cmp) sensor inspection
Caution
When foreign material such as an iron chip is on the CMP sensor,
it can cause abnormal output from the sensor because of flux turbulence and
adversely affect the engine control. Be sure there is no foreign material on
the CMP sensor when replacing.
Note
Perform the follow ...