Mazda 6 Service Manual: Center panel module disassembly/assembly
Caution
- Before disassembling the center panel module, spread a cloth on the floor to put the disassembled parts on. This protects the surface of the panel from scratches or dirt.
1. Remove the center panel module. (See CENTER PANEL MODULE REMOVAL/INSTALLATION.)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Center panel module removal/installation
1. Cancel the anti-theft operation. (with anti-theft system) (See ANTI-THEFT
SYSTEM.)
2. Disconnect the negative battery cable.
3. Remove the glove compartment.
4. Remove the rear console.
5. Re ...
Audio unit disassembly/assembly
1. Remove the audio unit. (See CENTER PANEL MODULE DISASSEMBLY/ASSEMBLY.)
2. Disassemble in the order indicated in the table.
3. Assemble in the reverse order of disassembly. ...
Other materials:
Mazda 6 Service Manual: Overheating
If the high engine coolant temperature warning light turns on, the vehicle loses
power, or you hear a loud knocking or pinging noise, the engine is probably too
hot.
WARNING
Pull over to a safe location,
then switch the ignition off and make sure the fan is not running before attempting
t ...
Mazda 6 Service Manual: Tire Inflation Pressure
WARNING
Always inflate the tires to the correct pressure: Overinflation or
underinflation of tires is dangerous. Adverse handling or unexpected tire failure
could result in a serious accident.
Use only a Mazda-genuine tire valve cap: Use of a non-genuine part
is dangerous as the correct tire ...