Mazda 6 Service Manual: Drive belt inspection
Note
- Front and water pump drive belt deflection/tension inspection is not necessary because of the use of the front drive belt auto tensioner.
Front Drive Belt
Verify that the drive belt auto tensioner indicator mark does not exceeds the limit.
- If it exceeds the limit, replace the drive belt.
Drive belt
...
Drive belt replacement
1. Remove the splash shield (RH).
2. Turn the center of the tensioner pulley clockwise to release tension to
the drive belt.
3. Remove the drive belt.
4. Reinstall the drive belt or install a n ...
Other materials:
Mazda 6 Service Manual: Front outer handle removal/installation
1. Remove the front door glass.
2. Detach the outer handle and front door latch rod.
3. For protector-equipped vehicles, refer to key cylinder
removal/installation to remove the protector.
4. Remove the bolts.
5. With the rear side of the outer handle fixed and the outer handle lever
pulle ...
Mazda 6 Service Manual: Anti-theft system
Alarm Conditions
If the anti-theft system protection has been activated, any one of the
following conditions will trigger the system:
- Disconnected battery cable
- Discharged battery
- Disconnected audio unit connectors
If the system is triggered, the audio unit will then be ...