Diagnostic procedure
Mazda 6 Service Manual: Drive belt replacement
1. Remove the splash shield (RH).
2. Turn the center of the tensioner pulley clockwise to release tension to
the drive belt.
3. Remove the drive belt.
4. Reinstall the drive belt or install a new drive belt.
5. Verify that the drive belt auto tensioner indicator mark does not exceeds
the l ...
Mazda 6 Service Manual: Clutch switch inspection
Note
Perform the following inspection only when directed.
Continuity Inspection
1. Verify that the clutch switch is installed properly.
2. Disconnect the negative battery cable.
3. Remove the clutch switch.
4. Inspect for continuity between the clutch switch terminals using an
ohmmeter. ...