1. Disconnect the negative battery cable.
2. Remove the left-side front side trim. (See FRONT SIDE TRIM REMOVAL/INSTALLATION)
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
Mazda 6 Service Manual: Initial setting
Note
A driver side window will not fully close automatically under
following the conditions:
- The battery has been disconnected during vehicle maintenance or
for other reasons.
- The power window main switch connector, or driver-side power
window motor connector has been discon ...
Mazda 6 Service Manual: Hold switch removal/installation
1. Disconnect the negative battery cable.
2. Remove the console.
3. Disconnect the connector and remove the HOLD switch terminals. (See
SELECTOR LEVER DISASSEMBLY/ASSEMBLY.)
4. Remove the selector lever knob component.
5. Remove the HOLD switch.
6. Install the HOLD switch to selector lever k ...