Mazda 6 Service Manual: Headlight cleaner nozzle removal/installation
1. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION)
2. Disconnect the headlight cleaner hose. (See HEADLIGHT CLEANER HOSE REMOVAL/INSTALLATION)
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
5. Adjust the headlight cleaner nozzle. (See HEADLIGHT CLEANER NOZZLE ADJUSTMENT.)
Headlight cleaner motor inspection
1. Disconnect the negative battery cable.
2. Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION)
3. Connect battery positive voltage to terminal D and ground to terminal C of
the motor. ...
Headlight cleaner nozzle adjustment
Use a needle or equivalent to adjust the headlight cleaner nozzle so that the
center of fluid properly sprays on the headlight as shown in the figure.
HEADLIGHT CLEANER NOZZLE CLEANING
Clean the ...
Other materials:
Mazda 6 Service Manual: Power steering fluid inspection
Fluid Level Inspection
1. Inspect the power steering fluid level.
Add fluid to the specified level as necessary.
Fluid specification
ATF M-III or equivalent (e.g. Dexron®II)
Fluid Leakage Inspection
1. Start the engine and let it idle.
2. Turn the steering wheel fully to the left and ...
Mazda 6 Service Manual: Operating Tips for MP3
MP3 stands for MPEG Audio Layer 3, which is standardized voice compression established
by the ISO*1 working group (MPEG).
Use of MP3 allows for audio data to be compressed to approximately a tenth of
the source data size.
This unit plays files with the extension (.mp3) as MP3 files.
*1 Intern ...