Mazda 6 Service Manual: Headlight cleaner switch inspection
1. Disconnect the negative battery cable.
2. Remove the headlight cleaner switch. (See HEADLIGHT CLEANER SWITCH REMOVAL/INSTALLATION)
3. Inspect for continuity between the headlight cleaner switch terminals using an ohmmeter.
- If not as specified, replace the light switch.
Headlight cleaner switch removal/installation
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Headlight Cleaner Switch Removal Note
1. Insert your hand f ...
Other materials:
Mazda 6 Service Manual: Clutch fluid replacement
Caution
Be careful not to spill clutch fluid on a painted surface. If this
should happen, wash it off immediately.
Note
Do not mix different brands of clutch fluid.
Do not reuse the clutch fluid that was drained out.
1. Remove the under cover.
2. Draw the fluid from the reservoir ...
Mazda 6 Service Manual: Windshield installation
Caution
To prevent the sealant from cracking or the glass from being
pushed out by air pressure if a door is closed, open all of the windows and
leave them open until the sealant has hardened.
1. Cut away the old sealant using a razor so that 1-2 mm {0.04-0.07 in}
thickness of sealant ...