Mazda 6 Service Manual: Headlight cleaner switch removal/installation
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Headlight Cleaner Switch Removal Note
1. Insert your hand from the lower side of the dashboard and squeeze the tabs of the headlight cleaner switch.
2. Pull the headlight cleaner switch forward to remove it.
Headlight cleaner hose removal/installation
1. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal. ...
Headlight cleaner switch inspection
1. Disconnect the negative battery cable.
2. Remove the headlight cleaner switch. (See HEADLIGHT CLEANER SWITCH
REMOVAL/INSTALLATION)
3. Inspect for continuity between the headlight cleaner switch ...
Other materials:
Mazda 6 Service Manual: Displayable Range on the Screen
The images on the screen may be different from the actual conditions.
NOTE
The displayable range varies depending on the vehicle and road conditions.
The displayable range is limited. Objects under the bumper or around
the bumper ends cannot be displayed.
The distance appearing in the ...
Mazda 6 Service Manual: Liftgate side trim removal/installation
1. Remove the liftgate upper trim.
2. Position the strap hanger as shown in the figure.
3. Pull the liftgate side trim toward you, then disengage clips A, pin B and
the strap hanger from the body and pin B, hook C, D from the liftgate lower
trim.
4. Remove the liftgate side trim.
5. Remo ...