Mazda 6 Service Manual: Immobilizer system

Theft-deterrent siren removal/installation

1. Disconnect the negative battery cable. 2. Remove the left side trunk side trim. 3. Remove in the order indicated in the table. 4. Install in the reverse order of removal. ...

Coil removal/installation

Note Do not remove the coil unless you are replacing it. When only the coil is replaced, the immobilizer system reprogram procedure is not necessary. 1. Disconnect the negative battery cab ...

Other materials:

Mazda 6 Service Manual: Pcv valve inspection
1. Disconnect the negative battery cable. 2. Remove the intake maniforld.(see INTAKE-AIR SYSTEM REMOVAL/INSTALLATION.) 3. Remove the PCV valve. 4. Blow through the valve and verify that air flows as specified. If not as specified, replace the PCV valve. Specification ...

Mazda 6 Service Manual: Plastic Part Maintenance
When cleaning the plastic lenses of the lights, do not use gasoline, kerosene, rectified spirit, paint, thinner, highly acidic detergents, or strongly alkaline detergents. Otherwise, these chemical agents can discolor or damage the surfaces resulting in a significant loss in functionalit ...