Mazda 6 Service Manual: Oil control valve (ocv)

Variable valve timing actuator removal/installation

L3 Caution Variable valve timing actuator can not be disassembled because it is a precision unit. Note Variable valve timing actuator camshaft sprocket is integrated with the variabl ...

Oil control valve (ocv) removal/installation

L3 1. Disconnect the negative battery cable. 2. Remove the plug hole plate. 3. Remove the high-tension lead. (See HIGH-TENSION LEAD REMOVAL/INSTALLATION.) 4. Remove the oil control valve (OCV) c ...

Other materials:

Mazda 6 Service Manual: No.2 air bag system warning light is illuminated all the time
Diagnostic Procedure When performing an asterisked (*) troubleshooting inspection, shake the wiring harness and connectors while doing the inspection to discover whether poor contact points are the cause of any intermittent malfunction. If there is a problem, check to make sure connec ...

Mazda 6 Service Manual: Spark plug removal/installation
1. Disconnect the negative battery cable. 2. Remove the plug hoie plate. Lift off and remove the plug hole plate from the installation areas (rubber and clips) as shown in the figure. 3. Disconnect the high-tension lead. 4. Remove the spark plugs using the plug-wrench. 5. Install th ...