L3
Caution
Note
1. Follow the timing chain removal/installation procedure from 1 to 13 and remove the timing chain. (See TIMING CHAIN REMOVAL/INSTALLATION.)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Variable Valve Timing Actuator Removal Note
1. Set a wrench or equivalent tool at the hexagonal part of the camshaft to prevent rotation.
2. Loosen the variable valve timing actuator tightening bolts.
Variable Valve Timing Actuator Installation Note
1. Set a wrench or equivalent tool at the hexagonal part of the camshaft to prevent rotation.
2. Tighten variable valve timing actuator tightening bolts.
Tightening torque 69-75N·m {7.10-7.6 kgf·m, 50.9-55.3 ft·lbf}
Mazda 6 Service Manual: Sas unit removal/installation
Warning
Handling the SAS unit improperly can accidentally deploy the air
bag modules and pre-tensioner seat belt, which may seriously injure you.
Read AIR BAG SYSTEM SERVICE WARNINGS before handling the SAS unit. (See
SERVICE WARNINGS.)
Caution
When replacing the SAS unit, config ...
Mazda 6 Service Manual: Transaxle range (tr) switch inspection
Operating Inspection
1. Verify that the starter operates only when the ignition switch is at the
START position with the selector lever in P or N position.
If not as specified, adjust the TR switch.
2. Verify that the back-up lights illuminate when shifted to R position with
the ignition ...