Mazda 6 Service Manual: On-board diagnostic [multiplex communication system]

Inspection of sst (deployment tool)

Use the SST (Deployment tool) to deploy a live (undeployed) air bag module or pre-tensioner seat belt before disposing of it. Before using the SST (Deployment tool), inspect its operation. ...

Multiplex communication system

Outline In case the controller area network (CAN) system is malfunctioning, read the DTCs of the following modules, using the SST (WDS or equivalent) to determine the malfunctioning system. ...

Other materials:

Mazda 6 Service Manual: A-pillar trim removal
1. Turn the seaming welt over. 2. Disengage clips A using a fastener remover. 3. Pull the A-pillar trim, then disengage clip B (1). 4. Pull the A-pillar trim upward, then disengage clip B from the A-pillar trim (2). 5. Pull clip B out, then rotate 45°. 6. Remove clip B from the grommet b ...

Mazda 6 Service Manual: Power steering fluid inspection
Fluid Level Inspection 1. Inspect the power steering fluid level. Add fluid to the specified level as necessary. Fluid specification ATF M-III or equivalent (e.g. Dexron®II) Fluid Leakage Inspection 1. Start the engine and let it idle. 2. Turn the steering wheel fully to the left and ...