Brake Judder Repair Hint
1. (See FRONT BRAKE (DISC) INSPECTION.)
Disc Plate Thickness Inspection
Caution
1. Measure the thickness of the disc plate.
Minimum
8 mm {0.31 in}
Minimum thickness after machining using a brake lathe on-vehicle
8.8 mm {0.35 in}
Disc Pad Thickness Inspection
1. Jack up the front of the vehicle and support it with safety stands.
2. Remove the wheel and tires.
3. Verify the remaining thickness of the pads.
Minimum thickness
2.0 mm {0.079 in} min.
4. Replace the pads as a set: right and left wheels, if either one is at or less than the minimum thickness.
Mazda 6 Service Manual: Turning the Engine Off
WARNINGDo not stop the engine while the vehicle is moving: Stopping the
engine while the vehicle is moving for any reason other than in an emergency is
dangerous. Stopping the engine while the vehicle is moving will result in reduced
braking ability due to the loss of power braking, which coul ...
Mazda 6 Service Manual: Smart City Brake Support (SCBS)
The Smart City Brake Support (SCBS) system alerts the driver of a possible collision
using an indication in the display and a warning sound when the Forward Sensing
Camera (FSC) detects a vehicle ahead and determines that a collision with a vehicle
ahead is unavoidable while the vehicle is bei ...