Mazda 6 manuals

Mazda 6 Service Manual: Side air bag sensor removal/installation

Mazda 6 Service Manual / Body electrical system / Air bag system / Side air bag sensor removal/installation

Warning

1. Turn the ignition switch to LOCK position.

2. Disconnect the negative battery cable and wait for more than 1 minute.

3. Remove the B-pillar lower trim.

4. Remove in the order indicated in the table.



5. Install in the reverse order of removal.

6. Turn the ignition switch to ON position.

7. Verify that the air bag system warning light illuminates for approximately 6 seconds

and then goes off.

Crash zone sensor removal/installation
Warning Handling the crash zone sensor improperly can accidentally deploy the air bag module and pre-tensioner seat belt, which may seriously injure you. Read AIR BAG SYSTEM SERVICE WARNINGS b ...

Sas unit removal/installation
Warning Handling the SAS unit improperly can accidentally deploy the air bag modules and pre-tensioner seat belt, which may seriously injure you. Read AIR BAG SYSTEM SERVICE WARNINGS before ...

Other materials:

Mazda 6 Service Manual: Basic power window system inspection
Manual Mode Function Inspection Automatic Mode Function Inspection Automatic Window Return Function Inspection IG OFF Timer Function Inspection Two-step Down Function Inspection The distance the door glass opens can be changed using the two-step down function. (Approximately 20- ...

Mazda 6 Service Manual: Automatic transaxle fluid (atf) replacement
Warning When the transaxle and ATF are hot, they can badly burn you. Turn off the engine and wait until they are cool before changing the ATF. 1. Remove the oil dipstick. 2. Remove the oil drain plug and washer. 3. Drain the ATF into a container. 4. Install a new washer and the drain ...

© 2016-2024 Copyright www.mazda6info.net