Follow either of these procedures.
To increase speed using cruise control switch
Press the RESUME/ switch and hold
it. Your vehicle will accelerate. Release the switch at the desired speed.
Press the RESUME/ switch and release
it immediately to adjust the preset speed. Multiple operations will increase the
preset speed according to the number of times it is operated.
Increasing speed with a single RESUME/
switch operation
Instrument cluster display for vehicle speed indicated in km/h: 1 km/h (0.6 mph)
Instrument cluster display for vehicle speed indicated in mph: 1 mph (1.6 km/h)
To increase speed using accelerator pedal
Depress the accelerator pedal to accelerate to the desired speed. Press the SET/
switch and release it immediately.
NOTE
Accelerate if you want to speed up temporarily when the cruise control is on.
Greater speed will not interfere with or change the set speed. Take your foot off the accelerator to return to the set speed.
Mazda 6 Owners Manual: Dual proportioning valve inspection (without abs)
1. Connect the SSTs to the brake pipes as shown in the figure.
2. Bleed the air from the brake system.
3. Measure the fluid pressure of the master cylinder and the rear brake.
If not within the specification, replace the dual proportioning valve.
Fluid pressure
...
Mazda 6 Owners Manual: Front seat belt removal/installation
Warning
Handling the front seat belt (pre-tensioner seat belt) improperly
can accidentally deploy the pre-tensioner, which may seriously injure you.
Read SERVICE WARNINGS before handling the front seat belt. (See SERVICE
WARNINGS.)
Warning
The side air bag sensor is attached to t ...