Mazda 6 Service Manual: Transaxle oil inspection
1. Park the vehicle on level ground.
2. Remove the oil level plug and washer.
3. Verify that the oil is near the brim of the plug port.
- If the oil level is lower than the low level, add the specified amount and type of oil through the oil level plug hole.
Specified oil grade API Service GL-4 or GL-5
Specified oil viscosity All-season: SAE 75W-90
Above 10 ° C {50 ° F}: SAE 80W-90
4. Install a new washer and the oil level plug.
Tightening torque 40-58 N·m {4.0-6.0 kgf·m, 29-43 ft·lbf}
Manual transaxle
...
Transaxle oil replacement
1. Remove the drain plug with the washer.
2. Drain the oil into a suitable container.
3. Install a new washer and the drain plug.
Tightening torque
40-58 N·m {4.0-6.0 kgf·m, 29-43 ft·lbf}
...
Other materials:
Mazda 6 Service Manual: Curtain Air Bags
The curtain air bags are mounted in the front and rear window pillars, and the
roof edge along both sides.
When the air bag crash sensors detect a side impact of greater than moderate
force, the curtain air bag inflates quickly and helps to reduce injury mainly to
the rear outboard passenger' ...
Mazda 6 Service Manual: Master cylinder removal/installation
1. Remove in the order indicated in the table.
R.H.D.
L.H.D.
2. Install in the reverse order of removal.
Master Cylinder Installation Note
Caution
Always install the gasket of the power brake unit push rod before
performing measurement inspections or adjustments.
1. Install the ...