Mazda 6 Service Manual: Radiator grille removal/installation
1. Remove the screws.
2. Press clip A in the direction of the arrow, pll the radiator grille outward and remove from the front bumper.
3. Install in the reverse order of removal.
Cowl grille removal/installation
1. Remove the windshield wiper arm and blade. (See WINDSHIELD WIPER ARM AND
BLADE REMOVAL/ INSTALLATION.)
2. Remove in the order indicated in the table.
3. Install in the reverse order of remo ...
Other materials:
Mazda 6 Service Manual: Engine coolant temperature (ect) sensor inspection
Note
Perform the following inspection only when directed.
ECT Sensor Resistance Inspection
1. Drain the engine coolant. (See COOLING SYSTEM SERVICE WARNINGS.)
2. Remove the ECT sensor (located above the starter).
3. Place the ECT sensor in water with a thermometer, and heat the water
gra ...
Mazda 6 Service Manual: Air mix actuator inspection
1. Connect battery positive voltage to terminal D or F and ground to terminal
F or D of the air mix actuator.
2. Verify that the air mix actuator operates as shown below.
If not as specified, replace the air mix actuator.
e
3. Verify that the resistance between the terminals of the ...