Mazda 6 Owners Manual: To Turn Off an Armed System
An armed system can be turned off using any one of the following methods:
- Pressing the unlock button on the transmitter.
- Starting the engine with the push button start.
- (With the advanced keyless function)
- Pressing a request switch on the doors.
The hazard warning lights will flash twice.
NOTE
When the doors are unlocked by pressing the unlock button on the transmitter while the theft-deterrent system is turned off, the hazard warning lights will flash twice to indicate that the system is turned off.
How to Arm the System
1. Close the windows and the moonroof securely (some models).
2. Switch the ignition OFF.
3. Make sure the hood, the doors, and the trunk lid are closed.
4.Press the lock button on the transm ...
To Stop the Alarm
A triggered alarm can be turned off using any one of the following methods:
Pressing the unlock button or the trunk button on the transmitter.
Starting the engine with the push button start.
( ...
Other materials:
Mazda 6 Owners Manual: Procedures for determining the location of a malfunction
System Wiring Diadram
PCM
1. Check the display of DTC U0121 and/or U0155, using the SST (WDS or
equivalent). (See DTC TABLE.)
2. Referring to the following table, determine the malfunctioning part of the
CAN system.
ABS/TCS HU/CM or DSC HU/CM
1. Accec and monitor the PCM MSG and IC MSGo ...
Mazda 6 Owners Manual: Electrical troubleshooting tools
Jumper wire
A jumper wire is used to create a temporary circuit. Connect the jumper
wire between the terminals of a circuit to bypass a switch.
Caution
Do not connect a jumper wire from the power source line to a body
ground. This may cause burning or other damage to wiring harnesse ...