Sunshade
Modification and Add-On EquipmentMazda 6 Owners Manual: Oil cooler flushing
Note
The contaminated cooler line (oil pipes and hoses) and auxiliary
cooler must be flushed completely when ATX is overhauled or replaced.
1. Remove the two oil cooler line hoses and apply air pressure of 196 kPa
{2.0 kgf/cm2, 28 psi} from the return hose (pipe) side.
Caution
Power ...
Mazda 6 Owners Manual: Rear wiper motor inspection
1. Disconnect the negative battery cable.
2. Remove the liftgate lower trim. (See LIFTGATE LOWER TRIM
REMOVAL/INSTALLATION)
3. Disconnect the rear wiper motor connector.
4. Connect battery positive voltage to the rear wiper motor terminal A and
the ground to a bare metal part of the vehicle a ...