Mazda 6 Owners Manual: Stopping The Smart Brake Support (SBS) System Operation
The Smart Brake Support (SBS) system can be temporarily deactivated.
When the Smart Brake Support (SBS) system is turned off, the Smart Brake Support (SBS) OFF indicator light turns on.
When the engine is restarted, the system becomes operational.
NOTE
If the Smart Brake Support (SBS) system operation is turned off, the Smart City Brake Support (SCBS) system operation is turned off simultaneously.
Collision Warning
If there is the possibility of a collision with a vehicle ahead, the beep sounds
continuously and a warning is indicated in the multi-information display and the
active driving display.
...
Forward Sensing Camera (FSC) (Some models)
Your vehicle is equipped with a Forward Sensing Camera (FSC). The Forward Sensing
Camera (FSC) is positioned near the rearview mirror and used by the following systems.
High Beam Control System ...
Other materials:
Mazda 6 Owners Manual: Joint shaft removal/installation
Caution
Performing the following procedures without first removing the ABS
wheel-speed sensor may possibly cause an open circuit in the harness if it
is pulled by mistake. Before performing the following procedures, remove the
ABS wheel-speed sensor and fix it to an appropriate place wh ...
Mazda 6 Owners Manual: Refrigerant pressure switch inspection
1. Install the SST (gas charging set).
2. Disconnect the refrigerant pressure switch connector.
3. Verify the high-pressure side reading of the SST (manifold gauge)
and continuity between the terminals of the refrigerant pressure switch.
If not as specified, replace the refrigerant pressure ...