Mazda 6 Owners Manual: To Deactivate
When a cruising speed has been set (cruise set indication (green) turns on)
Long-press the OFF/CANCEL switch or press the OFF/CANCEL switch 2 times.
When a cruising speed has not been set (cruise main indication (white) turns on)
Press the OFF/CANCEL switch.
To Temporarily Cancel
To temporarily cancel the system, use one of these methods:
Slightly depress the brake pedal.
(Manual transaxle) Depress the clutch pedal.
Press the OFF/CANCEL switch.
If the RESUME/ switch ...
Tire Pressure Monitoring System
The Tire Pressure Monitoring System (TPMS) monitors the air pressure of all four
tires. If the air pressure of one or more tires is too low, the system warns the
driver by indicating the tire pres ...
Other materials:
Mazda 6 Owners Manual: Heating
1. Set the mode selector dial to the
position.
2. Set the air intake selector to the outside air position (indicator light turns
off).
3. Set the temperature control dial to the hot position.
4. Set the fan control dial to the desired speed.
5. If dehumidified heating is desired, turn on the ...
Mazda 6 Owners Manual: A-pillar trim removal
1. Turn the seaming welt over.
2. Disengage clips A using a fastener remover.
3. Pull the A-pillar trim, then disengage clip B (1).
4. Pull the A-pillar trim upward, then disengage clip B from the A-pillar
trim (2).
5. Pull clip B out, then rotate 45°.
6. Remove clip B from the grommet b ...