Mazda 6 Owners Manual: Tire house trim removal/installation
4SD
1. Remove the rear scuff plate.
2. Remove the rear seat side.
3. Remove the fastener.
4. Pull the tire house trim upward, then disengage clips A from the body, and
remove the tire house trim.
5. Install in the reverse order of removal.
5HB
1. Remove the rear scuff plate.
2. Pull the ...
Mazda 6 Owners Manual: Bonnet adjustment
Gap Adjustment
1. Remove the front fender.
2. Loosen the bonnet hinge installation bolts and reposition the bonnet.
3. Tighten the bolts.
4. Verify that the gap between the bonnet and the body is within the
specification.
Clearance
a: 2.5-4.5 mm {0.08-0.17 in}
Height Adjustment
1 ...