Mazda 6 Service Manual: Ambient temperature sensor inspection
1. Measure the temperature around the ambient temperature sensor.
2. Measure the resistance between terminals of the ambient temperature sensor.
- If the resistance is not as shown in the graph, replace the ambient temperature sensor.
Ambient temperature sensor removal/installation
1. Disconnect the negative battery cable.
2. Remove the radiator grille. (See RADIATOR GRILLE REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
4. Install in the reverse ord ...
Cabin temperature sensor removal/installation
1. Disconnect the negative battery cable.
2. Remove the lower panel. (See LOWER PANEL REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
4. Install in the reverse order of re ...
Other materials:
Mazda 6 Service Manual: Steering angle sensor inspection
With DSC
1. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION)
2. Disconnect the steering angle sensor connector.
3. Connect battery positive voltage to terminal A and ground to terminal F of
the steering angle sensor.
4. Turn the steering wheel to the right and left, and verify ...
Mazda 6 Service Manual: Operational Range
The system operates only when the driver is in the vehicle or within operational
range while the key is being carried.
Starting the Engine
NOTE
Starting the engine may be possible even if the key is outside of the
vehicle and extremely close to a door and window, however, always start the ...