Mazda 6 Service Manual: Ambient temperature sensor removal/installation
1. Disconnect the negative battery cable.
2. Remove the radiator grille. (See RADIATOR GRILLE REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
Solar radiation sensor inspection
1. Shine an incandescent light (60 W) on the solar radiation sensor
from a distance of approximately 100 mm {3.94 in}.
2. Connect positive (+) lead to terminal A and negative (−) lead to term ...
Ambient temperature sensor inspection
1. Measure the temperature around the ambient temperature sensor.
2. Measure the resistance between terminals of the ambient temperature
sensor.
If the resistance is not as shown in the graph, ...
Other materials:
Mazda 6 Service Manual: A/c compressor removal/installation
1. Disconnect the negative battery cable.
2. Discharge the refrigerant from the system. (See RECOVERY.) (See CHARGING.)
3. Remove the right side splash shield and mudguard (L.H.D. only).
4. Loosen the drive belt and remove it.
Caution
If moisture or foreign material enters the refrigeration ...
Mazda 6 Service Manual: California Customers
1. Mazda North American Operations participates in BBB AUTO LINE, a mediation/
arbitration program administered by the Council of Better Business Bureaus [4200
Wilson Boulevard, Arlington, Virginia 22203] through local Better Business Bureaus.
BBB AUTO LINE and Mazda have been certified by the ...