Mazda 6 Service Manual: Bonnet removal/installation
Warning
- Removing the bonnet without supporting can be dangerous. The bonnet may fall and injure you. Always perform the following procedure with at least another person.
1. Disconnect the windshield washer hose.
2. To remove the bonnet hinge, remove the front fender panel.
3. To remove the bonnet lock, remove the radiator grille.
4. To remove the bonnet release cable, remove the driver-side mud guard.
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.
7. Adjust the bonnet. (See BONNET ADJUSTMENT.)
Bonnet
...
Bonnet adjustment
Gap Adjustment
1. Remove the front fender.
2. Loosen the bonnet hinge installation bolts and reposition the bonnet.
3. Tighten the bolts.
4. Verify that the gap between the bonnet and the body i ...
Other materials:
Mazda 6 Service Manual: Basic Operation Method
TOUCH & TAP
1. Touch or tap on the item indicated on the screen.
2. The operation is launched and the next item is displayed.
SLIDE
1. Touch the setting item displaying a slider bar.
2. Touch the slider with your finger and move to the desired level.
SWIPE
1. Touch the screen with you ...
Mazda 6 Service Manual: Instrument cluster removal/installation
Caution
When replacing the instrument cluster, the configuration procedure must be
performed before removing the instrument cluster. If the configuration procedure
is not performed before removing the instrument cluster, it is possible that the
instrument cluster will not operate normally. ...