Mazda 6 Service Manual: Inspection during removal, disassembly

Mazda 6 Service Manual / General information / Fundamental procedures / Inspection during removal, disassembly

When removed, each part should be carefully inspected for malfunction, deformation, damage, and other problems.

Disassembly

If the disassembly procedure is complex, requiring many parts to be disassembled, all parts should be marked in a place that will not affect their performance or external appearance and ident ...

Arrangement of parts

All disassembled parts should be carefully arranged for reassembly. Be sure to separate or otherwise identify the parts to be replaced from those that will be reused. ...

Other materials:

Mazda 6 Service Manual: Cruise Control (Some models)
With cruise control, you can set and automatically maintain any speed of more than about 25 km/h (16 mph). WARNING Do not use the cruise control under the following conditions: Using the cruise control under the following conditions is dangerous and could result in loss of vehicle control. ...

Mazda 6 Service Manual: Pcv valve inspection
1. Disconnect the negative battery cable. 2. Remove the intake maniforld.(see INTAKE-AIR SYSTEM REMOVAL/INSTALLATION.) 3. Remove the PCV valve. 4. Blow through the valve and verify that air flows as specified. If not as specified, replace the PCV valve. Specification ...