Mazda 6 Service Manual: Disassembly

Mazda 6 Service Manual / General information / Fundamental procedures / Disassembly

If the disassembly procedure is complex, requiring many parts to be disassembled, all parts should be marked in a place that will not affect their performance or external appearance and identified so that reassembly can be performed easily and efficiently.

Removal of parts

While correcting a problem, also try to determine its cause. Begin work only after first learning which parts and subassemblies must be removed and disassembled for replacement or repair. Aft ...

Inspection during removal, disassembly

When removed, each part should be carefully inspected for malfunction, deformation, damage, and other problems. ...

Other materials:

Mazda 6 Service Manual: Input/turbine speed sensor removal/installation
1. Disconnect the negative battery cable. 2. Remove the battery and battery tray. 3. Remove the air cleaner component. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION.) 4. Disconnect the input/turbine speed sensor connector. 5. Remove the input/turbine speed sensor. 6. Apply ATF to a new O-ring ...

Mazda 6 Service Manual: General procedures
PRECAUTION (FRONT AND REAR AXLE) Wheel and Tire Removal/Installation 1. The removal and installation procedures for the wheels and tires are not mentioned in this section. When a wheel is removed, tighten it to 88-118 N·m {9.0-12.0 kgf·m, 65.0-87.0 ft·lbf} Brake Line Disconnection/Connecti ...