Mazda 6 Service Manual: Removal of parts

Mazda 6 Service Manual / General information / Fundamental procedures / Removal of parts

While correcting a problem, also try to determine its cause. Begin work only after first learning which parts and subassemblies must be removed and disassembled for replacement or repair. After removing the part, plug all holes and ports to prevent foreign material from entering.

Disconnection of the negative battery cable

Before beginning any work, turn the ignition switch to LOCK position, then disconnect the negative battery cable and wait for more than 1 minute to allow the backup power supply of the SAS un ...

Disassembly

If the disassembly procedure is complex, requiring many parts to be disassembled, all parts should be marked in a place that will not affect their performance or external appearance and ident ...

Other materials:

Mazda 6 Service Manual: Tire Maintenance
Improper or inadequate vehicle maintenance can cause tires to wear abnormally. Here are some important maintenance points: Tire Inflation Pressure Inspect all tire pressure monthly (including the spare) when the tires are cold. Maintain recommended pressures for the best ride, top handling, an ...

Mazda 6 Service Manual: Declaration of Conformity
Keyless Entry System/Immobilizer System Blind Spot Monitoring (BSM) System NOTE During printing time of this user manual the approvals listed above are granted. WARNING Change or modifications not expressively approved by the party responsible for compliance could void the use's authori ...