Mazda 6 Service Manual: Magnetic clutch adjustment
1. Measure the clearance around the entire circumference between the pressure plate and A/C compressor pulley using a thickness gauge.
2. Verify that the clearance is within the specification.
- If not within the specification, remove the pressure plate and adjust the clearance by changing the shim (0.2 mm {0.008 in}, 0.5 mm {0.02 in}) or the number of shims.
Clearance
0.3-0.5 mm {0.012-0.019 in}
Magnetic clutch disassembly/assembly
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
3. Adjust the magnetic clutch clearance. (See MAGNETIC CLUTCH ADJUSTMENT.)
Bolt Removal/Inst ...
Magnetic clutch inspection
1. Connect battery positive voltage to terminal A of magnetic clutch and
ground to A/C compressor body.
2. Verify that the magnetic clutch operates.
If not as specified, replace the stator an ...
Other materials:
Mazda 6 Service Manual: Front seat belt removal/installation
Warning
Handling the front seat belt (pre-tensioner seat belt) improperly
can accidentally deploy the pre-tensioner, which may seriously injure you.
Read SERVICE WARNINGS before handling the front seat belt. (See SERVICE
WARNINGS.)
Warning
The side air bag sensor is attached to t ...
Mazda 6 Service Manual: Operating Tips for USB device
This unit plays audio files as follows:
CAUTION
Do not use an audio file extension on files other than audio files. In addition,
do not change the audio file extension. Otherwise, the unit will not recognize the
file correctly resulting in noise or a malfunction.
NOTE
Playback may not b ...