Mazda 6 Service Manual: No.1 abs warning light, brake system warning light, tcs off light do not
illuminate with ignition switch on
Vehicle with ABS/TCS
- When performing an asterisked (*) troubleshooting inspection, shake the
wiring harness and connectors while doing the inspection to discover whether
poor contact points are the cause of any intermittent malfunction. If there
is a problem, check to make sure connectors, terminals and wiring harnesses
are connected correctly and undamaged.
Verify the symptoms, and perform troubleshooting according to the
appropriate number.
Vehicles with ABS/TCS
Vehicles with DSC
*1 : DSC system contains traction control function, DSC ind ...
When performing an asterisked (*) troubleshooting inspection, shake the
wiring harness and connectors while doing the inspection to discover whether
poor contact points are the cause of a ...
Other materials:
Mazda 6 Service Manual: Diagnostic assist function
Structural View
Switch location
LCD Inspection
1. With audio on, first press the POWER button, then simultaneously press the
SEEK button (upper) for approximately 1 second.
2. Inspect the LCD according to the following table:
3. Turn the audio off or the ignition switch to the LOCK posi ...
Mazda 6 Service Manual: Dtc table
Note
Perform the following if the security light stays on:
- If gasoline engine stalls, go to symptom troubleshooting NO.11
ENGINE STALLS/QUITS, ENGINE RUNS ROUGH, MISSES, BUCK/JERK,
HESITATION/STUMBLE, SURGES in. (See NO.11 ENGINE STALLS/QUITS, ENGINE RUNS
ROUGH, MISSES, BUCK/J ...