Mazda 6 Service Manual: Rear package trim removal/installation
1. Remove the high-mount brake light.
2. Fold the rear seat back.
3. Remove the fasteners.
4. Pull the rear package trim upward, then disengage the clips from the body.
5. Disengage the hooks, then remove the rear package trim.
6. Install in the reverse order of removal.
Tire house trim removal/installation
4SD
1. Remove the rear scuff plate.
2. Remove the rear seat side.
3. Remove the fastener.
4. Pull the tire house trim upward, then disengage clips A from the body, and
remove the tire house tr ...
Trunk side trim removal/installation
4SD
1. Remove the trunk end trim.
2. Remove the fasteners, then remove the trunk side trim.
3. Install in the reverse order of removal.
5HB
1. Remove the trunk end trim.
2. Remove the trunk si ...
Other materials:
Mazda 6 Service Manual: Power window motor inspection
Drivers Side
1. Disconnect the power window motor connector.
2. Apply battery positive voltage to the power window motor terminals E and F
and inspect the operation the power window motor operation.
If not as specified, replace the power window motor.
3. Apply battery positive voltage ...
Mazda 6 Service Manual: Volume/Display/Sound Controls
Volume adjustment
Turn the commander switch volume dial.
The volume switch on the steering switch can also be pressed.
Display setting
Select the icon on the home
screen to display the Settings screen.
Select the tab to select the
item you would like to change.
Display OFF/Clock
The c ...