Mazda 6 Service Manual: Rearview mirror

Power outside mirror switch inspection

Inspect for continuity between the power outside mirror switch terminals using an ohmmeter. If not as specified, replace the power outside mirror switch. ...

Rearview mirror removal

1. Insert a screwdriver between the mirror and the base. 2. Push the base pin down to remove the rearview mirror. ...

Other materials:

Mazda 6 Service Manual: Disconnection of the negative battery cable
Before beginning any work, turn the ignition switch to LOCK position, then disconnect the negative battery cable and wait for more than 1 minute to allow the backup power supply of the SAS unit to deplete its stored power. Disconnecting the battery cable will delete the memories of the ...

Mazda 6 Service Manual: Diagnostic trouble code number inspection
1. Remove the glove compartment. 2. Short the A/C check connector to the GND terminal using a jumper wire. 3. Shine a 60 W incandescent light from a height of approximately 100 mm {3.9 in} onto the solar radiation sensor. Note When incandescent light does not shine on the solar radiatio ...