Mazda 6 Service Manual: Rubber parts and tubing

Adjustment

Use suitable gauges and/or testers when making adjustments. ...

Hose clamps

When reinstalling, position the hose clamp in the original location on the hose and squeeze the clamp lightly with large pliers to ensure a good fit. ...

Other materials:

Mazda 6 Service Manual: Wheel hub bolt replacement
1. Remove the hub bolt using the SSTs. Note If the dust cover interferes with the wheel hub bolt and the wheel hub bolt cannot be removed, tap the part shown in the figure with a chisel lightly and bend the processing point back to the steering knuckle side. 2. Install the hub bolt i ...

Mazda 6 Service Manual: Procedures for determining the location of a malfunction
System Wiring Diadram PCM 1. Check the display of DTC U0121 and/or U0155, using the SST (WDS or equivalent). (See DTC TABLE.) 2. Referring to the following table, determine the malfunctioning part of the CAN system. ABS/TCS HU/CM or DSC HU/CM 1. Accec and monitor the PCM MSG and IC MSGo ...