Mazda 6 Service Manual: Hose clamps
- When reinstalling, position the hose clamp in the original location on the hose and squeeze the clamp lightly with large pliers to ensure a good fit.
Rubber parts and tubing
Prevent gasoline or oil from getting on rubber parts or tubing.
...
Torque formulas
When using a torque wrench-SST or equivalent combination, the
written torque must be recalculated due to the extra length that the SST
or equivalent adds to the torque wrench.
Recalculate t ...
Other materials:
Mazda 6 Service Manual: Rear seat removal/installation
4SD
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
5HB
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
Remote wire removal note
1. Turn over the trunk floor mat.
2. Remove the case.
3. Remove the ...
Mazda 6 Service Manual: Rear window glass removal
1. For the 4SD, remove the following parts:
(1) Remove the headliner.
(2) Remove the rear package trim.
2. For the 5HB, remove the following parts.
(1) Remove the rear wiper arm and blade.
(2) Remove the liftgate lower trim.
3. Apply protective tape along the edge of the body to pr ...
© 2016-2024 Copyright www.mazda6info.net