Caution
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
Locknut Removal Note
1. Knock the crimped portion of the locknut outward using a small cape chisel and a hammer.
2. Lock the hub by applying the brakes.
3. Remove the locknut.
ABS Sensor Rotor Removal Note
Note
Remove the sensor rotor using a chisel.
ABS Sensor Rotor Installation Note
Caution
1. Set the SST
as shown in the figure.
2. Press on the new sensor rotor using the SST
and a press.
Locknut Installation Note
Install a new locknut and stake it as shown.
Mazda 6 Service Manual: Replacing Windshield Wiper Blades
When the wipers no longer clean well, the blades are probably worn or cracked.
Replace them.
CAUTION
To prevent damage to the wiper arms and other components, do not try to sweep
the wiper arm by hand.
NOTE
When raising both windshield wiper arms, raise the driver's side wiper arm
first. W ...
Mazda 6 Service Manual: Inspection of dtcs for condition detection mode
Note
The cruise set indicator light will illuminate for 3 seconds,
when condition detection mode is on.
If the RESUME/ACCEL switch on the cruise control switch is
malfunctioning, the cruise set indicator light will not give a correct
indication when you inspect the system.
1. Drive ...