Mazda 6 Service Manual: Windshield washer hose removal/installation
1. Remove the bonnet insulator.
2. Partially peel off the right side mud guard.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
Windshield washer nozzle cleaning
1. Clean the washer nozzle by inserting and moving a needle or an equivalent
tool back and forth.
If the nozzle becomes clogged again after cleaning, remove the hose from
washer nozzle. Make ...
Rear washer motor removal/installation
1. Disconnect the negative battery cable.
2. Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION)
3. Remove in the order indicated in the table.
4. Install in the reverse order of rem ...
Other materials:
Mazda 6 Service Manual: Keys
WARNING
Do not leave the key in your vehicle with children and keep them in a place
where your children will not find or play with them: Leaving children in a
vehicle with the key is dangerous. This could result in someone being badly injured
or even killed. Children may find these keys to be ...
Mazda 6 Service Manual: Rear washer nozzle removal/installation
1. Disconnect the negative battery cable.
2. Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM
REMOVAL/INSTALLATION)
3. Remove the rear washer hose from the rear washer nozzle.
4. Compress the tabs of the rear washer nozzle.
5. Pull the rear washer nozzle out to remove it.
6. Install ...