Mazda 6 Service Manual: Windshield washer nozzle cleaning
1. Clean the washer nozzle by inserting and moving a needle or an equivalent tool back and forth.
- If the nozzle becomes clogged again after cleaning, remove the hose from washer nozzle. Make sure there is enough washer fluid. Then turn the washer switch on and flush the inside of the hose.
Windshield washer nozzle removal/installation
1. Remove the bonnet insulator.
2. Remove the windshield washer hose from the windshield washer nozzle.
3. Compress the hooks of the windshield washer nozzle.
4. Pull the windshield washer nozzle o ...
Windshield washer hose removal/installation
1. Remove the bonnet insulator.
2. Partially peel off the right side mud guard.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal. ...
Other materials:
Mazda 6 Service Manual: Before repair procedure
Warning
Fuel vapor is hazardous. It can easily ignite, causing serious
injury and damage. Always keep sparks and flames away from fuel.
Fuel line spills and leakage are dangerous. Fuel can ignite and
cause serious injuries or death and damage. Fuel can also irritate skin and
eyes. To ...
Mazda 6 Service Manual: Oil pan
OIL PAN REMOVAL/INSTALLATION
Warning
Hot engine and engine oil can cause severe burns. Turn off the
engine and wait until it and the engine oil have cooled.
1. Disconnect the negative battery cable.
2. Remove the under cover.
3. Drain the engine oil. (See ENGINE OIL REPLACEMENT.)
4. Re ...