Mazda 6 Service Manual: Wiper and washer switch removal/installation
1. Disconnect the negative battery cable.
2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION)
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
Intermittent rear wiper relay inspection
1. Connect the connector to the intermittent rear wiper relay.
2. Connect the negative battery cable.
3. Measure the voltage at the intermittent rear wiper relay using voltmeter.
When inspecting ...
Wiper and washer switch inspection
Windshield Wiper And Washer Switch
Without vehicle-speed sensing type wipers
1. Remove the wiper and washer switch. (See WIPER AND WASHER SWITCH
REMOVAL/INSTALLATION)
2. Inspect for continuity be ...
Other materials:
Mazda 6 Service Manual: Mazda Radar Cruise Control (MRCC) (Some models)
The Mazda Radar Cruise Control (MRCC) system is designed to maintain headway
control*1 according to the vehicle speed using a radar sensor (front) to detect
the distance to a vehicle ahead, and by presetting the vehicle speed between 30
km/h (19 mph) and 145 km/h (90 mph), the driver is freed ...
Mazda 6 Service Manual: Moonroof (Some models)
The moonroof can be opened or closed electrically only when the ignition is switched
ON.
WARNING
Do not let passengers stand up or extend part of the body through the open
moonroof while the vehicle is moving: Extending the head, arms, or other parts
of the body through the moonroof is dan ...