Brake
Foot BrakeMazda 6 Owners Manual: Intake air temperature (iat) sensor inspection
Resistance Inspection
Note
Perform the following inspection only when directed.
1. Disconnect MAF/IAT sensor.
2. Measure the resistance between the MAF/IAT sensor terminals D and E using
an ohmmeter.
If not as specified, replace the MAF/IAT sensor.
If the MAF/IAT sensor is okay, but ...
Mazda 6 Owners Manual: Liftgate side trim removal/installation
1. Remove the liftgate upper trim.
2. Position the strap hanger as shown in the figure.
3. Pull the liftgate side trim toward you, then disengage clips A, pin B and
the strap hanger from the body and pin B, hook C, D from the liftgate lower
trim.
4. Remove the liftgate side trim.
5. Remo ...