Mazda 6 Service Manual: No.3 even when headlight switch is turned on, daytime screen does not change to night time screen. (front and rear combination lights operate normally.)

Mazda 6 Service Manual / Body electrical system / Troubleshooting / No.3 even when headlight switch is turned on, daytime screen does not change to night time screen. (front and rear combination lights operate normally.)

Diagnostic procedure

No.2 in navigation mode, vehicle locator mark skips

Diagnostic procedure ...

Air bag system

Troubleshooting Index Use the chart below verify the symptoms of the trouble in order to diagnose the appropriate area. ...

Other materials:

Mazda 6 Service Manual: C-pillar trim removal/installation
4SD 1. Remove the tire house trim. 2. Turn the seaming welt over. 3. Remove the cap using a fastener remover, and remove the bolt (with curtain air bag system). 4. Disengage clips A and clip B using a fastener remover. 5. Pull the C-pillar trim forward, then disengage hook C from the body, ...

Mazda 6 Service Manual: Ignition coil inspection
Primary Coil Winding 1. Remove the ignition coil. 2. Measure the resistance between the following lead holes using an ohmmeter. A and B, B and C - If not specified, replace the ignition coil. Specification 0.49-0.57 ohms [20°C {68°F}] Secondary Coil Winding 1. Remove the igni ...