1. Measure the gap and height between the liftgate and the body.
2. If not as specified, loosen the liftgate hinge installation bolts or the liftgate striker installation screws, and reposition the liftgate.
Clearance
a: 3.0-7.0 mm {0.12-0.28 in}
b: -1.0-3.4 mm {-0.04-013 in}
c: 2.8-5.2 mm {0.11-0.24 in}
d: -1.2-1.2 mm {0.05-0.05 in}
e: 2.8-5.8 mm {0.11-0.22 in}
f:4.0-8.0 mm {0.16-0.31 in}
3. Tighten the bolts or screws.
Mazda 6 Service Manual: Schedule 1
U.S.A. and Puerto Rico residents - Engine oil flexible maintenance interval
Use when the maintenance monitor for “Oil Change” is set to “Flexible”. For
details, see maintenance monitor.
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
T: ...
Mazda 6 Service Manual: Ignition coil inspection
Primary Coil Winding
1. Remove the ignition coil.
2. Measure the resistance between the following lead holes using an ohmmeter.
A and B, B and C
- If not specified, replace the ignition coil.
Specification
0.49-0.57 ohms [20°C {68°F}]
Secondary Coil Winding
1. Remove the igni ...