Mazda 6 Service Manual: Liftgate upper trim removal/installation
1. Pull the liftgate upper trim toward you, then disengage clips A, and pin B from the body.
2. Remove the liftgate upper trim.
3. Install in the reverse order of removal.
Trunk end trim removal/installation
4SD
1. Remove the fasteners.
2. Pull the trunk end trim upward, then disengage clips A, pins B, and hooks.
3. Remove the trunk end trim.
4. Install in the reverse order of removal.
5HB
1. Pull ...
Liftgate side trim removal/installation
1. Remove the liftgate upper trim.
2. Position the strap hanger as shown in the figure.
3. Pull the liftgate side trim toward you, then disengage clips A, pin B and
the strap hanger from the bod ...
Other materials:
Mazda 6 Service Manual: Abs (abs/tcs) on-board diagnosis
On-Board Diagnostic (OBD) Test Description
The OBD test inspects the integrity and function of the ABS (ABS/TCS)
and outputs the results when requested by the specific tests.
On-board diagnostic test also:
- Provides a quick inspection of the ABS (ABS/TCS) usually performed at
the ...
Mazda 6 Service Manual: Front fog light bulb removal/installation
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
Caution
A halogen bulb generates extremely high heat when it is used. If
the surface of the bulb is soiled, excessive heat will build up and the
lights life will be shortened. When replacing the ...