Mazda 6 Service Manual: Rear abs wheel-speed sensor removal/installation
1. Remove the tire house trim. (TIRE HOUSE TRIM REMOVAL/INSTALLATION.)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Front/rear abs wheel-speed sensor inspection
Visual Inspection
Remove the wheel and tire, and inspect the sensor for looseness and damage.
Replace the sensor if necessary.
Clearance Inspection
Inspect the clearance between the wheel-speed s ...
Other materials:
Mazda 6 Service Manual: Mass air flow (maf) sensor inspection
Voltage Inspection
Note
Perform the following inspection only when directed.
1. Visually inspect for the following on the MAF sensor.
Damage
Cracks
Terminal bends
Terminal rust
- If any of the above are found, replace the MAF sensor.
- If the MAF PID value is out of specifi ...
Mazda 6 Service Manual: Oil filter
OIL FILTER REPLACEMENT
For Europe (LF and L3 engine models)
Caution
To avoid damage to the oil filter, use only specified oil filter.
1. Remove the oil filter drain plug.
2. Untighten the oil filter cover for 2 turns and drain the engine oil.
Note
Oil could be easily drained when th ...