Mazda 6 Service Manual: Recliner motor inspection
1. Disconnect the recliner motor connector.
2. Inspect the recliner motor operation when B+ is applied to the terminal as shown.
- If not as specified, replace the seat cushion frame.
Slide motor inspection
1. Disconnect the slide motor connector.
2. Inspect the slide motor operation when B+ is applied to the terminals as
shown.
If not as specified, replace the seat cushion frame.
...
Seat warmer switch removal/installation
1. Disconnect the negative battery cable.
2. Remove the brake boots panel. (See CONSOLE REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
4. Install in the reverse order of ...
Other materials:
Mazda 6 Service Manual: Audio control switch inspection
1. Disconnect the negative battery cable.
2. Remove the driver-side air bag module. (See DRIVER-SIDE AIR BAG MODULE
REMOVAL/INSTALLATION.)
3. Disconnect the audio control switch connector.
4. Measure the resistance and inspect for continuity between the cruise
control switch terminals using a ...
Mazda 6 Service Manual: Front fog light aiming
1. Adjust the tire air pressure to the specification.
2. Position the unloaded vehicle on a flat, level surface.
3. Seat one person in the drivers seat.
4. Position the vehicle 3 m {10 ft} in front of a white screen.
5. While adjusting one fog light, mask the other.
6. Start the engine to cha ...