Mazda 6 Service Manual: Roof molding removal
1. Detach the clips which secure A and B sections of roof molding, using a screwdriver or equivalent tool.
2. While pulling the roof molding up, detach the fit for the T stat of the A section and the roof molding and then remove the roof molding.
Rear beltline molding installation
1. Press the clip at the C section into the body.
2. Press in the B section of the rear beltline molding along the direction
(1) to attach it to the body.
3. Press the clip at the A section in a ...
Roof molding installation
1. Attach the roof molding to the T stud at the A section.
2. Press in the roof molding along the direction (1) shown in the figure and
attach it to the clip A at the B section.
3. Hook the roof ...
Other materials:
Mazda 6 Service Manual: Component Parts
Microphone (hands-free)
The microphone is used for speaking voice commands or when making a Hands-free
call.
Talk button, Pick-Up button and Hang-Up button (hands-free)
The basic functions of Bluetooth® Hands-Free can be used for such things as making
calls or hanging up using the talk, pi ...
Mazda 6 Service Manual: Dsc system inspection
Preparation
1. Verify that the battery is fully charged.
2. With ignition switch on, verify that the ABS warning light goes out after
2.4 seconds.
3. Turn the ignition switch off.
4. On level ground, jack up the vehicle and support it evenly on safety
stands.
5. Shift the transaxle to N posi ...