Mazda 6 Service Manual: Molding
- Front beltline molding removal
- Front beltline molding installation
- Rear beltline molding removal
- Rear beltline molding installation
- Roof molding removal
- Roof molding installation
Roof carrier bracket removal/installation
1. Remove the headliner.
2. Remove the nuts.
3. Remove the roof carrier bracket.
4. Install in the reverse order of removal. ...
Front beltline molding removal
Note
When removing the front beltline molding, the clip may be damaged. If
the clip is damaged, replace it with a new one.
1. Pull the A section upward and remove the clip.
2. Rotate the ...
Other materials:
Mazda 6 Service Manual: Manual Transaxle Shift Pattern
The shift pattern of the transaxle is conventional, as shown.
Depress the clutch pedal all the way down while shifting; then release it slowly.
Your vehicle is equipped with a device to prevent shifting to R (reverse) by mistake. Push the shift lever downward and shift to R.
...
Mazda 6 Service Manual: Blind Spot Monitoring (BSM) Warning Indicator Lights/Display Indicator/ Blind
Spot Monitoring (BSM) Warning Beep
The Blind Spot Monitoring (BSM) or Rear Cross Traffic Alert (RCTA) system notifies
the driver of the presence of vehicles in adjacent lanes or at the rear of the vehicle
using the Blind Spot Monitoring (BSM) warning indicator light, the warning sound
and the display indicator (vehicles with mu ...