Mazda 6 Owners Manual: Stopping the Smart City Brake Support (SCBS) System Operation
The Smart City Brake Support (SCBS) system can be temporarily deactivated.
When the Smart City Brake Support (SCBS) system is turned off, the Smart City Brake Support (SCBS) OFF indicator light turns on.
When the engine is restarted, the system becomes op onal.
Automatic Brake Operation Display (Type A Instrument Cluster)
“Smart City Brake Support activated” is indicated in the active driving display,
and “Smart City Brake Support Activated” is indicated in the multi-information display
after the SCBS brake ...
Smart Brake Support (SBS) (Some models)
The Smart Brake Support (SBS) system alerts the driver of a possible collision
using a display and warning sound if the radar sensor (front) and the Forward Sensing
Camera (FSC) determine that the ...
Other materials:
Mazda 6 Owners Manual: Rear map light removal/installation
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Rear Map Light Removal Note
1. Insert a tape-wrapped flathead screwdriver into the gap between the
headliner and the rear map light.
2. Push the hooks to re ...
Mazda 6 Owners Manual: Transaxle range (tr) switch inspection
Operating Inspection
1. Verify that the starter operates only when the ignition switch is at the
START position with the selector lever in P or N position.
If not as specified, adjust the TR switch.
2. Verify that the back-up lights illuminate when shifted to R position with
the ignition ...