Mazda 6 Owners Manual: To Decrease Cruising Speed
Press the SET/
switch and hold
it. The vehicle will gradually slow.
Release the switch at the desired speed.
Press the SET/ switch and release
it immediately to adjust the preset speed.
Multiple operations will decrease the preset speed according to the number of times it is operated.
Decreasing speed with a single SET/
switch operation
Instrument cluster display for vehicle speed indicated in km/h: 1 km/h (0.6 mph)
Instrument cluster display for vehicle speed indicated in mph: 1 mph (1.6 km/h)
To Increase Cruising Speed
Follow either of these procedures.
To increase speed using cruise control switch
Press the RESUME/ switch and hold
it. Your vehicle will accelerate. Release the switch at the desired speed.
Press ...
To Resume Cruising Speed at More Than 25 km/h (16 mph)
If some other method besides the OFF/ CANCEL switch was used to cancel cruising
speed (such as applying the brake pedal) and the system is still activated, the
most recent set speed will automatic ...
Other materials:
Mazda 6 Owners Manual: Heated oxygen sensor (ho2s) inspection
HO2S Voltage Inspection
Note
Perform the following inspection only when directed.
1. Warm up the engine and run it at idle.
2. Disconnect the HO2S connector.
3. Connect the voltmeter test leads to the following HO2S terminals:
HO2S (front and rear)
- (+) leadterminal A
- (-) le ...
Mazda 6 Owners Manual: Engine coolant temperature (ect) sensor inspection
Note
Perform the following inspection only when directed.
ECT Sensor Resistance Inspection
1. Drain the engine coolant. (See COOLING SYSTEM SERVICE WARNINGS.)
2. Remove the ECT sensor (located above the starter).
3. Place the ECT sensor in water with a thermometer, and heat the water
gra ...